Dyness PowerBox Pro 10.24kWh 51.2V LiFePO₄ Lithium Solar Battery; 200Ah, 100A Charge/Discharge, 90% DoD, 6000+ Cycles, CAN/RS485, IP65, Scalable to 512kWh

• 10.24kWh nominal LiFePO₄ battery capacity for residential and light commercial storage.
• 51.2V low-voltage architecture with 200Ah nominal capacity.
• 100A recommended charge and discharge current at 0.5C.
• 90% recommended depth of discharge for daily cycling.
• 6000+ cycle life under Dyness test conditions.
• CAN and RS485 communication for compatible hybrid and off-grid inverters.
• IP65 enclosure suitable for flexible indoor or protected outdoor installation.
• Wall-mounted or floor-mounted installation options.
• Expandable up to 50 units in parallel - up to 512kWh total nominal capacity for current production versions.
• Compatible with Deye, Victron, GoodWe, Solis, Growatt, SMA and other supported inverter platforms.

The Dyness PowerBox Pro is a 10.24kWh low-voltage LiFePO₄ battery designed for hybrid and off-grid energy storage. Its 51.2V, 200Ah architecture provides 5.12kW nominal power, 100A recommended charge/discharge current and IP65 protection for flexible residential and light-commercial installations.

• Model: PowerBox Pro
• Battery Chemistry: LiFePO₄
• Nominal Energy: 10.24kWh
• Nominal Voltage: 51.2V
• Operating Voltage Range: 44.8-57.6V
• Nominal Capacity: 200Ah
• Nominal Power: 5.12kW
• Recommended Charge/Discharge Current: 100A
• Recommended C-Rate: 0.5C
• Recommended Depth of Discharge: 90%
• Cycle Life: 6000+ cycles
• Communication: CAN / RS485
• WiFi: Optional
• Protection Rating: IP65
• Dimensions: 555 × 210 × 928mm
• Weight: approximately 99.3-103kg depending on production revision
• Charging Temperature: 0°C to 55°C
• Discharging Temperature: -20°C to 55°C
• Expansion: Up to 50 units in parallel for current production versions

Designed for compatible low-voltage hybrid and off-grid inverter systems. Dyness lists compatibility with platforms including Deye, Victron Energy, GoodWe, Solis, Growatt, SMA, LuxPower and others. Inverter firmware and battery communication compatibility should be confirmed before commissioning.

Installation

The PowerBox Pro supports wall-mounted and floor-mounted installation. Its IP65 enclosure offers increased environmental protection, but installation should still follow Dyness clearance, temperature and ventilation requirements.